HomePower ToolsDrill PressesBenchtop Drill Presses
80151 Variable speed drive with digital readout for accurate RPM adjustment
Palmgren 80151 1 Horsepower 15-Inch Bench Drill Press with Variable Speed
  • Features
  • Other
  • Reviews
  • PRICES
Palmgren 80151
  • Variable speed drive with digital readout for accurate RPM adjustment
  • Rugged, heavy duty cast iron for smooth operation
  • Steel gears in rack and pinion to accurately raise and lower table
  • 1 HP motor is actual working HP
  • Infinitely variable speed from 300 to 3000 RPM
Compare Prices

61302 Punches or tools may be added to the end of the ram with the aid of a magnetic insert
Palmgren 61302 RS30 3-Ton Manual Ratcheting Arbor Press
  • Features
  • Other
  • Reviews
  • PRICES
Palmgren 61302
  • Rugged steel ram is driven by machined pinion.
  • Punches or tools may be added to the end of the ram with the aid of a magnetic insert
  • Base drilled for mounting on bench or pedestal.
  • Study cast iron construction
  • Removable machined steel anvil provides accurate work support in four slot positions
Compare Prices

2530 2-7/8' ground steel column diameter for maximum head and table support
Wilton 2530 15-Inch Bench Drill Press (WMH Tool Group)
  • Features
  • Other
  • Reviews
  • PRICES
WMH Tool Group 2530
  • Large 1-7/8" quill allows greater accuracy
  • Massive T-slotted production work table
  • 2-7/8" ground steel column diameter for maximum head and table support
  • 3-3/8" stroke for deep hole applications
  • Accurate depth stop for precise hole depths
Compare Prices

80171 Cast-iron head, base, table and column
Palmgren 80171 3/4 Horsepower 17-Inch Bench Drill Press
  • Features
  • Other
  • Reviews
  • PRICES
Palmgren 80171
  • Enclosed ball bearing quill assembly with long spindle travel. Maximum spindle run-out of 0.0005".
  • Locking power switch prevents unauthorized use.
  • Precision ground work table can be tilted 45 degrees both right and left, and rotates 360? on a vertical axis. Steel rack and pinion with locking mechanism for easy table height adjustment.
  • Cast-iron head, base, table and column
Compare Prices

61401 Study cast iron construction
Palmgren 61401 AP40 4-Ton Manual Arbor Press
  • Features
  • Other
  • Reviews
  • PRICES
Palmgren 61401
  • Removable machined steel anvil provides accurate work support in four slot positions
  • Punches or tools may be added to the end of the ram with the aid of a magnetic insert
  • Base drilled for mounting on bench or pedestal.
  • Rugged steel ram is driven by machined pinion.
  • Study cast iron construction
Compare Prices

80153 Precision-machined and designed with rigid stable construction
Palmgren 80153 1/2 Horsepower 15-Inch Bench Drill Press
  • Features
  • Other
  • Reviews
  • PRICES
Palmgren 80153
  • Precision-machined and designed with rigid stable construction
  • Measures 15 inches
  • Includes chuck with safety-eject key, chuck, arbor, and power cord
  • Work table can be tilted 45 degrees both left and right; rotates 360 degrees on a vertical axis
  • 1/2 HP 15-inch 12-speed bench drill press provides accurate drilling in tough materials like cast iron and steel
Compare Prices
What's in the Box

DP350 Sturdy table adjusts 90 degrees to the left or right; rack-and-pinion depth adjustment allows for precise drilling
Delta DP350 Shopmaster 1/3 Horsepower 12-Inch Bench Drill Press
  • Features
  • Other
  • Reviews
  • PRICES
Delta DP350
  • Super sturdy cast-iron construction virtually eliminates vibration
  • Sturdy table adjusts 90 degrees to the left or right; rack-and-pinion depth adjustment allows for precise drilling
  • Includes 1/2-inch chuck key, belt and pulleys, and flexible lamp
  • Powerful 1/3 HP motor with variable speed capabilities of 500-3,100 RPM
  • Measures 22 x 11 x 37 inches and weighs 78 pounds
Compare Prices
Here's a benchtop instrument that packs the force of the heavy boys. With 6 inches from fleck halfway to tower, you tin drill accompanying comfort into the midway of a foot-wide room in contrast with a 3-1/4-inch apoplexy and a ditch throat content of 1/2 in. The iron tabularise tilts left-hand and right-hand to 90 degrees by means of a confirming halt at 0, and offers variable-speed verify at the turn over of a telephone dial. Changing speeds is as unsubdivided as turn the pommel, allowing you to drill at 500 rpm up to 3,100 rpm. Have any repetitious boring to do? The adjustable-position lockup deepness kibosh takes the put out come out of the book of job. Rack-and-pinion tabulate deepness accommodation makes rearing and letting down the tabularize no act at totally, and here's a skillful bonus--a inherent gooseneck lamp. When you're through boring, simply soda pop come out the removable refuge change to foreclose wildcat habituate. --Kris Jensen-Van Heste

354165 3/4 HP 115/230-Volt motor; 15-Inch swing; adjustable tension spindle return spring
JET 354165 JDP-15M 3/4 Horsepower 15-Inch Bench Drill Press (WMH Tool Group)
  • Features
  • Other
  • Reviews
  • PRICES
WMH Tool Group 354165
  • Includes 5/8-Inch drill chuck and key; built-in work-light (bulb not included)
  • Crank-operated, rotating worktable tilts up to 45-Degree; full 10-by-13-Inch work surface
  • 3/4 HP 115/230-Volt motor; 15-Inch swing; adjustable tension spindle return spring
  • Bench mount drill press with 16 speeds ranging from 200 to 3,630 RPM
  • Measures 31-by-13-by-39-1/2-Inch (Length by Weight by Height); weighs 150-Pound
Compare Prices
Spindle Thread = MT-2/JT-33Spindle Travel = 3 1/8 inDrilling Cap. = 5/8 inNo. of Speeds = 16Spindle Chuck Size = 5/8 inSpeed = 200 rpm [Min], 3630 rpm [Max]Phase = SinglePower Cap. = 3/4 hpControl Voltage = 115.00 VHeight = 39 1/2 inBit/Blade Mounting Swing = 15 inWidth = 13 inCord Table/Plate Length = 16 inTable/Plate Width = 13 inColumn Diameter = 2 7/8 inColumn Neck Base Length = 20 3/8 inBase Width = 11 inBase Depth = 31 inWt. = 150 lb

70103 Stand comes with built-in cup for catching expressed pieces
Palmgren 70103 Arbor Press Stand
  • Features
  • Other
  • Reviews
  • PRICES
Palmgren 70103
  • Stand comes with built-in cup for catching expressed pieces
  • Base and top are case iron with a body of welded steel
  • The stand has a slot on the top for pieces which need to extend below the base of the press table
  • Fits all Palmgren 2-4 ton arbor presses
Compare Prices

Delta DP300 Shopmaster 12-Inch Drill Press
  • Features
  • Other
  • Reviews
  • PRICES
Delta DP300
  • Five velocity options, 620 to 3100 rpm on this account that boring in a change of materials
  • Motor put on pivots in opposition to easygoing and immobile velocity ever-changing
  • Position lockup deepness block as antidote to easygoing repetitious boring trading operations
  • Table tilts up to 45 degrees on the side of precise opening boring
  • 2 twelvemonth modified guaranty on machines, endowments and accessories
Compare Prices
Here's a benchtop cat's-paw that packs the force of the heavy boys. With 6 inches from flake halfway to pillar, you put up drill according to comfort into the middle of a foot-wide room by means of a 2-3/8-inch apoplexy and a ditch throat content of 1/2 in. The iron tabularize tilts left-hand and right-hand to 45 degrees by means of a confirming block at 0, and offers 5 drill speeds depending on your stuff and scrap sizing. You don't regular feature to live that which velocity is the right-hand one--there's a chart privileged the pulley block extend that dictates belted ammunition velocity according to hole out sizing and stuff. Changing speeds is as unsubdivided as adjusting the belted ammunition on the pulley-block. Have a portion repetitious boring to do? The adjustable-position lockup deepness kibosh testament occupy the discommode come out of the book of job. Rack-and-pinion tabularize deepness accommodation makes nurture and letting down the tabulate no act at completely, and here's a skillful incentive you won't regain received on other models--a integral utensil salver. When you're through boring, simply soda come out the removable refuge change to forestall wildcat habituate. --Kris Jensen-Van Heste 12" Bench Drill Press, 1/3 HP, 115V, Single Phase, 60Hz, Motor Tilting Table, Table Raising Mechanism, 0-1/2" Capacity Chuck & Key, Belt & Pulleys, Instruction Manual, Cast Iron Construction, 2 Year Warranty.

Recent
Intermatic FF6H Energy Controls - In-Wall Timers 6 Hour Commercial Without Hold. Inductive: 20 Amp 125 VAC 50/60 Hz ;10 Amp250 VAC 50/60 Hz.
Decorative Switch Plate. Keyboard & Clef.
KV 8400 Series Full Extension Percision Ball Bearing Slides Self Closing 16" 100# Class (Set). Optional Face Frame bracket, Search: KV Face Frame Mounting Bracket.
Pages: 1 2 3